Discussions : Support

Community forums

OpenEVSE Discord Channel

Posted by OpenEVSE Support, 2 months ago
Last Reply by OpenEVSE Support about 2 months ago
OCPP Guide Pulse Energy

Posted by OpenEVSE Support, 2 months ago
Last Reply by OpenEVSE Support 2 months ago
New 3.5" Color LCD display

Posted by OpenEVSE Support, 12 months ago
Last Reply by Kim Wall about 1 month ago
New Enclosure for 3.5" Display

Posted by OpenEVSE Support, 12 months ago
Last Reply by OpenEVSE Support 12 months ago
OpenEVSE has moved.

Posted by OpenEVSE Support, over 5 years ago
Last Reply by Karen Nakamura about 5 years ago

OpenEVSE board for juicebox

Posted by openev. freshdesk. com@redsails. net, 6 days ago
Last Reply by OpenEVSE Support about 6 hours ago
OpenEVSE JuiceBox guts -- replacement WiFi Antenna

Posted by Bryce Nesbitt, about 21 hours ago
Last Reply by OpenEVSE Support about 6 hours ago
New Build/Install - Using cables from Juicebox

Posted by Michelle Stoetzel, 2 months ago
Last Reply by Mark Rustad about 18 hours ago
Grizzl-E Smart

Posted by Chris Foos, 1 day ago
Last Reply by Chris Foos 1 day ago
Suitable relays for 3 phase Advanced Kit

Posted by Dave Aitchison, over 1 year ago
Last Reply by fastbike 2 days ago

New lids and display; Data transfer?

Posted by Theo Abramovich, 5 months ago
Last Reply by Theo Abramovich about 1 month ago
Cannot set current above 24A

Posted by John Daisley, about 2 months ago
Last Reply by OpenEVSE Support about 2 months ago
why is my system detected as 120V (in EU)

Posted by Dan Padure, over 2 years ago
Last Reply by Jérémy Filhoulaud about 2 months ago
Update Firmware

Posted by coyote-89, 6 months ago
Last Reply by James B 2 months ago
German manufacturer Intercon no longer exists

Posted by Michael Kotzolt, 2 months ago
Last Reply by OpenEVSE Support 2 months ago

Totals not transfering or displaying correctly?

Posted by Theo Abramovich, about 1 month ago
Last Reply by Theo Abramovich about 1 month ago
Load balancing Two Chargers

Posted by Freddy Diaz, about 1 month ago
Last Reply by Freddy Diaz about 1 month ago
Modbus Support for Dynamic Load Management

Posted by Chris Barth, about 1 month ago
Last Reply by Chris Barth about 1 month ago
Wifi losing connection

Posted by Julien Bascoulergue, 4 months ago
Last Reply by OpenEVSE Support 2 months ago
JSON format in MQTT?

Posted by Kevin L, almost 2 years ago
Last Reply by Jeff 2 months ago

Legal self-install of EVSE may come to an end, in the USA

Posted by Bryce Nesbitt, about 21 hours ago
Last Reply by OpenEVSE Support about 6 hours ago
National Electric Code to require upstream GFCI

Posted by Bryce Nesbitt, 5 months ago
Last Reply by Elliott Balsley about 1 month ago
Low Amperage Charging - is it possible?

Posted by Clive Kneebone, almost 7 years ago
Last Reply by Elliott Balsley about 1 month ago
Sheduled Charging

Posted by Michelle Stoetzel, about 1 month ago
Last Reply by OpenEVSE Support about 1 month ago
Load Balance between Grizzl-e and OpenEVSE

Posted by Freddy Diaz, about 1 month ago
Last Reply by Freddy Diaz about 1 month ago

Designing EV side power solutions (Type 2, Lvl 2 AC charging)

Posted by IPad workim, 12 days ago
Last Reply by IPad workim 12 days ago
Type 2 Extension

Posted by Ken Gillett, 4 months ago
Last Reply by Ken Gillett 4 months ago
Mennekes Type 2 IEC 62196 connections

Posted by Chris Beath, over 6 years ago
Last Reply by OpenEVSE Support 6 months ago
is DC residual current protection required ?

Posted by Aleš Kramžar, about 3 years ago
Last Reply by Howard Lewis over 2 years ago
24 Hour clock

Posted by Kjetil Nysæter, over 3 years ago
Last Reply by Kjetil Nysæter over 3 years ago

Turn off LCD Backlight when idle?

Posted by David Johnson, over 7 years ago
Last Reply by ty. lastrapes@gmail. com 2 months ago
Remote Temperature Sensor?

Posted by Pir8radio, over 4 years ago
Last Reply by Kim Wall 4 months ago
Please Integration with NJ State run EV charger program

Posted by Agi Stan, 4 months ago
Last Reply by OpenEVSE Support 4 months ago
Overclocking j1772, 200 amps on tesla plug

Posted by Eli Protica, 7 months ago
Last Reply by Bryce Nesbitt 4 months ago
Divert only during particular periods of the day?

Posted by Ewan.reg, over 1 year ago
Last Reply by Alastair Dick 7 months ago

hardwired input cable?

Posted by Erich Hammer, over 1 year ago
Last Reply by Nathan Hubbard about 1 month ago
Use Solar to charge to 70% and then 100% from grid

Posted by Tommy, about 2 years ago
Last Reply by Charles Brennan 9 months ago
Resetting After Cutting Power

Posted by Matt Percy, over 1 year ago
Last Reply by OpenEVSE Support over 1 year ago
Remote start for Open EVSE

Posted by Ganesh Prabhu M, almost 2 years ago
Last Reply by OpenEVSE Support almost 2 years ago
Has anyone used the OpenEVSE hardware in a condominium garage ?

Posted by YH Cho, over 2 years ago
Last Reply by YH Cho over 2 years ago

EVSE Randomly Goes offline and Charges outside of the schedule

Posted by Ed Martin, 2 days ago
Last Reply by Ed Martin 2 days ago
Randomly goes offline and charges against schedule

Posted by Ed Martin, 4 days ago
Last Reply by Ed Martin 4 days ago
Charger boot looping when Wi-Fi module plugged in

Posted by Rob Reason, 3 months ago
Last Reply by Rob Reason about 1 month ago
Unable to adjust amperage

Posted by Jeremy Akers, 12 months ago
Last Reply by Pauljordan99 about 2 months ago
Wifi card without firmware

Posted by Cyrilidevin, 3 months ago
Last Reply by Cyrilidevin 3 months ago