Support
How can we help you today?
The recharge data is not transferred to the Club
OpenEVSE Support
Hi Tou,
Firmware 4.8.0 on the safety controller is before we added WiFi support. The Minimum is 7.1.3 the latest firmware is 9.4.0
Chris
Ok, how can upload the right version the firmeware? I have already Vs Code with PlatformIo on my new cumputer.
i konw that i must go on GitHub but i cannot find the package to download. Could you attach the file. Regards
OpenEVSE Support
The latest is on github here:
https://github.com/OpenEVSE/open_evse/releases/download/latest/m328p_LCD_WIFI.hex
Here is a guide on flashing:
https://openevse.dozuki.com/Guide/How+to+Load+OpenEVSE+Firmware+(WinAVR)/7?lang=en
You do not need the UBEC 12v to 5v converter anymore, that was for generic Huzzah modules. The OpenEVSE WiFi has a built in converter. You can remove the UBEC and plug in the red and black wires from the harness where the UBEC is now.
Tou Doux
Hi, I have a charging station from 2018, firmware version 4.8.0, and I just bought a new Wi-Fi module with firmware version 5.1.4.
The goal is to transmit charging data to a club using the OCPP protocol. The problem is that the data isn't transferring. Is the new Wi-Fi module too recent for the charging station?