Support

Announcements 13

• OpenEVSE Discord Channel
  Posted by OpenEVSE Support, almost 2 years ago

  Last Reply by OpenEVSE Support almost 2 years ago
• OCPP Guide Pulse Energy
  Posted by OpenEVSE Support, almost 2 years ago

  Last Reply by OpenEVSE Support almost 2 years ago
• New 3.5" Color LCD display
  Posted by OpenEVSE Support, over 2 years ago

  Last Reply by Sa 12 months ago
• New Enclosure for 3.5" Display
  Posted by OpenEVSE Support, over 2 years ago

  Last Reply by OpenEVSE Support over 2 years ago
• OpenEVSE has moved.
  Posted by OpenEVSE Support, almost 7 years ago

  Last Reply by Karen Nakamura almost 7 years ago
See all 13 topics

OpenEVSE Hardware 353

• EVSE does not connect to Wi-Fi
  Posted by Robert Lowry, 6 days ago

  Last Reply by OpenEVSE Support 1 day ago
• OpenEVSE board for juicebox
  Posted by openev. freshdesk. com@redsails. net, over 1 year ago

  Last Reply by Kevin L 5 days ago
• Packard C240C Instructions
  Posted by Ranvin56, 8 days ago

  Last Reply by OpenEVSE Support 7 days ago
• Where can I buy a replacement relay?
  Posted by Greg B., over 1 year ago

  Last Reply by OpenEVSE Support 17 days ago
• Problème alimentation module wifi
  Posted by Hertz, 27 days ago

  Last Reply by Hertz 27 days ago
See all 353 topics

OpenEVSE Firmware 129

• Firmware to be able to utalise DC relays 1 and 2
  Posted by Nick K, 4 months ago

  Last Reply by OpenEVSE Support 4 months ago
• Eco mode" with smart load from solar inverter + scheduling on a zero export solar system?
  Posted by Michael Oosting, 4 months ago

  Last Reply by Michael Oosting 4 months ago
• Flash Wifi Board
  Posted by Javier Mitchell, 6 months ago

  Last Reply by Javier Mitchell 6 months ago
• Evse dongfeng x70 (evolut i pro)
  Posted by Nikolai Omelchenko, 8 months ago

  Last Reply by OpenEVSE Support 7 months ago
• 'No Ground' error when unplugging from wall outlet
  Posted by James Clough, 9 months ago

  Last Reply by OpenEVSE Support 8 months ago
See all 129 topics

OpenEVSE WiFi, RAPI and Communications 152

• OpenEVSE Charging Issue - "NO GROUND" Error / Stops Charging
  Posted by lostintheether, 27 days ago

  Last Reply by OpenEVSE Support 27 days ago
• MQTT: can read but not write?
  Posted by Philip Semanchuk, 3 months ago

  Last Reply by Philip Semanchuk 3 months ago
• RFID to provide access to OpenEVSE load
  Posted by Oliver G France, about 3 years ago

  Last Reply by C. Scott Ananian 4 months ago
• Update Openevse Charge rate via mqtt
  Posted by VJ V3, over 2 years ago

  Last Reply by OpenEVSE Support 4 months ago
• OpenEVSE module missing. Please check set up before going further
  Posted by Shaun Houston, about 1 year ago

  Last Reply by OpenEVSE Support 6 months ago
See all 152 topics

Electric Vehicles 37

• Guide on building SAE J1772
  Posted by Drew Hillman, 7 months ago

  Last Reply by Scott Wilson about 1 month ago
• Prius Prim in consistent
  Posted by Roby, John W III, 8 months ago

  Last Reply by Roby, John W III 8 months ago
• Sheduled Charging
  Posted by Michelle Stoetzel, almost 2 years ago

  Last Reply by Fred83 8 months ago
• charge
  Posted by WonderNomad, over 1 year ago

  Last Reply by Michael Cronenworth over 1 year ago
• National Electric Code to require upstream GFCI
  Posted by Bryce Nesbitt, about 2 years ago

  Last Reply by Bryce Nesbitt over 1 year ago
See all 37 topics

International 13

• Bidirectional charger from OpenEVSE
  Posted by David G Brice, about 1 year ago

  Last Reply by David G Brice about 1 year ago
• Designing EV side power solutions (Type 2, Lvl 2 AC charging)
  Posted by IPad workim, over 1 year ago

  Last Reply by IPad workim over 1 year ago
• Type 2 Extension
  Posted by Ken Gillett, almost 2 years ago

  Last Reply by Ken Gillett almost 2 years ago
• Mennekes Type 2 IEC 62196 connections
  Posted by Chris Beath, about 8 years ago

  Last Reply by OpenEVSE Support about 2 years ago
• is DC residual current protection required ?
  Posted by Aleš Kramžar, almost 5 years ago

  Last Reply by Howard Lewis about 4 years ago
See all 13 topics

Feature Requests 31

• Auto clock sync after power-on
  Posted by Martin Pritchard, about 7 years ago

  Last Reply by Doug LaRue 5 months ago
• Please Integration with NJ State run EV charger program
  Posted by Agi Stan, about 2 years ago

  Last Reply by Douglas Jones 8 months ago
• Emulate Wallbox OCPP to integrate with Octopus
  Posted by Andy Barron, about 1 year ago

  Last Reply by Bryan Smith 9 months ago
• Pay to Charge - OCPP v2 ?
  Posted by Mark Spohr, about 1 year ago

  Last Reply by OpenEVSE Support about 1 year ago
• Mimic Wallbox OCPP configuration to integrate with Octopus Intelligent
  Posted by Andy Barron, about 1 year ago

  Last Reply by Andy Barron about 1 year ago
See all 31 topics

Tips and Tricks 24

• JuiceBox 40 - dead
  Posted by Alex G, over 1 year ago

  Last Reply by Alex G over 1 year ago
• hardwired input cable?
  Posted by Erich Hammer, about 3 years ago

  Last Reply by Nathan Hubbard almost 2 years ago
• Use Solar to charge to 70% and then 100% from grid
  Posted by Tommy, almost 4 years ago

  Last Reply by Charles Brennan over 2 years ago
• Resetting After Cutting Power
  Posted by Matt Percy, over 3 years ago

  Last Reply by OpenEVSE Support over 3 years ago
• Remote start for Open EVSE
  Posted by Ganesh Prabhu M, over 3 years ago

  Last Reply by OpenEVSE Support over 3 years ago
See all 24 topics

Report a problem 115

• Are they still shipping?
  Posted by Christopher Flynn, about 1 month ago

  Last Reply by OpenEVSE Support 29 days ago
• Order shipment and customer support is terrible.
  Posted by Steve Tarara, about 1 month ago

  Last Reply by OpenEVSE Support about 1 month ago
• Open EVSE shutting down after relay click on startup.
  Posted by Jeremy Wolf, 6 months ago

  Last Reply by Jeremy Wolf 6 months ago
• Connection failure
  Posted by Ken Gillett, 7 months ago

  Last Reply by OpenEVSE Support 6 months ago
• openevse shows higher usage than measured
  Posted by Kris, 7 months ago

  Last Reply by Kris 7 months ago
See all 115 topics