How can we help you today?

Start a new topic
Discussions OpenEVSE Forums
OpenEVSE Hardware 341

Discussion about OpenEVSE Hardware, circuits and design.

A
Connecting v5.5 controller to LCD and WIFI that worked with v. 5.0.
Posted by Andy Barr, over 2 years ago , Last Reply by Andy Barr over 2 years ago
K
Operation using NEMA 5-15
Posted by Kabin Nam, over 2 years ago
T
No Struthers-Dunn relay in kit, Packard contactor instead?
Posted by Toby Murray, over 2 years ago , Last Reply by OpenEVSE Support over 2 years ago
Y
OpenEVSE WiFi Gateway V4.x
Posted by Yury, over 2 years ago , Last Reply by OpenEVSE Support over 2 years ago
M
How do I surge protect EVSE
Posted by Michael Runyan, over 2 years ago , Last Reply by Village Idiot over 2 years ago
P
Pilot voltage too low @ 11.35V. How to fix?
Posted by Peter Mack, over 2 years ago , Last Reply by Peter Mack over 2 years ago
S
Charging at higher current than available from solar
Posted by Sam Koerner, over 2 years ago , Last Reply by Sam Koerner over 2 years ago
D
OpenEVSE nuisance trips when my PV production is high. No issues on OpenEVSE logs
Posted by Damien, over 2 years ago , Last Reply by OpenEVSE Support over 2 years ago
Dynamically adjust output power DURING a charge
Posted by Mathieu Carbou, over 2 years ago , Last Reply by Mathieu Carbou over 2 years ago
M
Control Pilot query
Posted by Mike Pringuer, over 2 years ago , Last Reply by OpenEVSE Support over 2 years ago