Start a new topic

Australian plug - AS/NZS 3123

 

I've bought an openevse charger which comes with a IEC_60309 plug, however, this isn't supported in Australia.


I've sourced an Australian (AS/NZS 3123) standard plug and it does look quite straightforward to replace the IEC with the Australian plug.


Do I need to make any modifications to the regulator which powers the relay and Arduino boards to accept 240V?


Thanks


No changes are required. OpenEVSE uses a Universal Switch Mode power supply and can take any input from 96 - 264v 50 or 60 hz Single or Split Phase. 


After you remove the IEC CEE 60309 connect:


Red - Hot

Black - Neutral (Hot 2 for Split Phase)

Green - Earth Ground 


1 person likes this

Thanks for the help, all working now. 


Here is a video of the setup.


https://myattachments.s3.amazonaws.com/Openevse20200920.mp4


Login or Signup to post a comment