Start a new topic

List of components for the v5 controler

 Hello!


I am curently working on a project to modify the v5 controler board from the advanced openEVSE kit. I am making my own pcb and therefore i need to order all the components already on the board.


I want to ask if there are any documents detailing the components, or maybe someone already went through the trouble of making such a list? If such a list exists perhaps someone could also tell me the best site to order these parts.


Hi


I am also building v5, and nowhere can I found value for element U$1, it seem lika an NTC .

Anybody any idea.

Thanks


@Al the RTC IC is located on the LCD display.


@ Denis, MOV Value will depend on the requirements of your AC relay coil matching with the Panasonic 2333 driver chip. DC relays do not need the MOV. You can try the  V275LA20AP suggested above.

The BOM is embedded in the source files, it can be opened in Autodesk Eagle.

Hello again :)

I'm in Europe and I'm at the process of sourcing components for OpenEVSE. I think I've got most of the parts. But I would like to get someone to look at it and check for mistakes. I didn't find any tolerance or operating voltages so I hope that those parts are fine.

 

Chip Resistor - Surface Mount 620Ohms ±1% 1/8W 0805  [R1]
Diodes - General Purpose 400V 1A 1.1V @ 1A SMAF [D7,D8]
Tantalum Capacitors 10uF 16V CASE-A_3216 [C4,C14]
Chip Resistor - Surface Mount 412Ohms ±1% 1/8W 0805  [R17]
SMD Crystal Resonators 16MHz ±20ppm SMD-3225_4P [Q1]
General Purpose Amplifiers General Purpose 2 3V ~ 32V, ±1.5V ~ 16V 700kHz 0.3 V/us SOIC-8_150mil  [IC3]
Transistors (NPN/PNP) NPN 600mA 40V SOT-23(SOT-23-3)  [Q2,Q3]
FET InputAmplifiers J-FET 2 10V ~ 36V, ±5V ~ 18V 4MHz 13 V/us SOIC-8  [IC4]
Zener Diodes SOT-23(SOT-23-3)  [D1]
ATMEL & AVR TQFP-32_7x7x08P  [IC2]
Multilayer Ceramic Capacitors MLCC - SMD/SMT 22pF 50V 0805  [C1,C2]
Switching Diode 75V 150mA 1.25V @ 150mA 4ns SOD-123 [D2,D3,D4,D5,D6]
Multilayer Ceramic Capacitors MLCC - SMD/SMT 1uF 50V 0805 [C5,C6]
Chip Resistor - Surface Mount 330Ohms ±1% 1/8W 0805 [R11,R23,R24,R29]
Chip Resistor - Surface Mount 10KOhms ±1% 1/8W 0805 [R2,R10,R19]
Chip Resistor - Surface Mount 200KOhms ±1% 1/8W 0805  [R7]
Chip Resistor - Surface Mount 2.4KOhms ±1% 1/8W 0805 [R12,R13]
Chip Resistor - Surface Mount 22Ohms ±1% 1/8W 0805  [R26]
Multilayer Ceramic Capacitors MLCC - SMD/SMT 100nF 50V 0805 [C3, C7, C8, C9, C10, C11, C12]
Chip Resistor - Surface Mount 100KOhms ±1% 1/8W 0805 [R6,R8,R9,R14,R16,R21,R25]
Chip Resistor - Surface Mount 100Ohms ±1% 1/8W 0805 [R18]
Multilayer Ceramic Capacitors MLCC - SMD/SMT 2.2uF 50V 0805 [C13]
Chip Resistor - Surface Mount 180Ohms ±1% 1/4W 1206 [R28]
Chip Resistor - Surface Mount 56KOhms ±1% 1/8W 0805 [R5]
Chip Resistor - Surface Mount 1KOhms ±1% 1/8W 0805 [R3,R20]
Chip Resistor - Surface Mount 20KOhms ±1% 1/8W 0805 [R15]

 I have a problem finding P6SMB16CA. Mostly out of stock. Can I replace it with something?

Also, there's a component called MOV. I found it in one of the earlier version guides that I can use V275LA20AP. Can I?

Another thing, what is the pitch of 1X06_LOCK, 12VDC, AC, AMP_CT, DC_RELAY, GFCI_CT, I2C, PILOT? Mostly all of through hole components. Is it 0.1"? Mixed maybe? 


Thanks for any answers!

Hi. I’m also trying to build myself open EVSE. I have found projects of board and schematics. I’ve downloaded eagle cad version 9.1.3 (free). I can open schematics but the board gives errors. I’ve also tried to open the board in KiCad but it also gives errors while importing eagle files. Can you tell me if there is a specific version of eagle cad or maybe the file on project page is corrupted? Can anyone check it? Thanks!

I'm sorry, but I can't edit previous post.

I have re downloaded everything and it looks like my file got corrupted somehow. It's working fine now.


Thanks!

BTW. Is there a RTC that maintains the date and time in this design?

Login or Signup to post a comment