Start a new topic

Assembly Advanced 48A/ kit

I'm still assembling the kit and got stuck at Step 6 (pg.8) of the Openevse guide_26. Says to "connect wires from WiFi power supply" to the Controller.  I looked at the Dwg. 20180411 (Wiring for ver.5?) but don't see anything named WiFi Power Supply.  I do have a small 2-wire thing with a wired-3-hole connector and 2 wires on each end.

Is there an updated video of assembly for the 40amp units?

This is the WiFi power supply. The 2 bare wires connect to the screw terminals and the connector connects to the wiring harness.

Thanks for the info.

Login or Signup to post a comment