Start a new topic

Assembly Advanced 48A/ kit

I'm still assembling the kit and got stuck at Step 6 (pg.8) of the Openevse guide_26. Says to "connect wires from WiFi power supply" to the Controller.  I looked at the Dwg. 20180411 (Wiring for ver.5?) but don't see anything named WiFi Power Supply.  I do have a small 2-wire thing with a wired-3-hole connector and 2 wires on each end.

This is the WiFi power supply. The 2 bare wires connect to the screw terminals and the connector connects to the wiring harness.

Thanks for the info.

Is there an updated video of assembly for the 40amp units?

Login or Signup to post a comment