Support
How can we help you today?
Relay is not closing
2 CommentsSorted by Newest First
Thank you for your quick reply Sir... I have cleared the no ground fault by connecting one of the terminal of 12 relay to the common terminal of the relay on the openEVSE board and the other to the relay 1 / relay 2. when i have changed the connection the relay got closed and its showing charging.
OpenEVSE Support
said
almost 6 years ago
No Ground can be caused by:
A bad connection to Earth Ground
A bad/poor ground from the OpenEVSE Controller to the Ground plane in the station.
Missing AC_Test wires to the load EV Side of the Contactor
Relay that is not closing
Can you send a picture of your wiring?
Shyamily Haridas
I have done the 40A advanced charging station connection as per the procedures given. I have tested the control pilot circuit and connected WiFi also to my computer. the problem is that the relay is not closing and also when i put on the charging mode it is showing no ground. Can you please tell what might be the reason for not closing of the relay?