Support

Has anyone done any testing with the WiFi kit inside the old aluminum case? I'm guessing the attenuation is noticeable, considering the enclosure and antenna.

I don't know if I'd want to run the power & I2C wires through one of the AC connections at the bottom. I'd be interested in suggestions if moving the module outside the case is necessary.

Thanks!

-Paul

Fortunately for me the access point and module are close enough to connect.So externalizing the WiFi module using the 4-wire set is my backup plan. It's a few dBm (~4) above the noise floor so the signal isn't great but it works for the moment.