Hi everyone, I am using the mqtt topic from home assistant to measure readings in volts.
mqtt topic in home assistant:
z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Energomonitor', payload '{"ac_frequency":49.96,"current":39.88,"energy":12937.24,"energy_reactive":3431.42,"linkquality":163,"power":7156,"power_factor":99.8,"power_reactive":147,"produced_energy":0.51,"state":"ON","total_energy":12937.76,"voltage":179.4}'
In Openevse voltage topiс i write:
zigbee2mqtt/Energomonitor/voltage
Foto in attachment.
But the volt readings in Openevse do not change. What am I doing wrong?
Vertaza
Hi everyone, I am using the mqtt topic from home assistant to measure readings in volts.
mqtt topic in home assistant:
z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Energomonitor', payload '{"ac_frequency":49.96,"current":39.88,"energy":12937.24,"energy_reactive":3431.42,"linkquality":163,"power":7156,"power_factor":99.8,"power_reactive":147,"produced_energy":0.51,"state":"ON","total_energy":12937.76,"voltage":179.4}'
In Openevse voltage topiс i write:
zigbee2mqtt/Energomonitor/voltage
Foto in attachment.
But the volt readings in Openevse do not change. What am I doing wrong?