Support
How can we help you today?
WiFi (ESP32), UI port, and https
5 CommentsSorted by Newest First
OpenEVSE Support
said
7 months ago
The Pull Request for Certificate Management is our developer's number 1 priority and very close to complete. https://github.com/OpenEVSE/openevse_esp32_firmware/pull/695
This will allow HTTPS as well as client certificates for OCPP and MQTT.
Just installed OpenEVSE Wifi 5.0.0 and it doesn't appear to have HTTPS support. Just making sure I'm not missing something and it is there.
Hi,
is it possible to use a nodeMCU (ESP32) module for the wifi setup?
Al Savage
said
almost 2 years ago
Thanks. I've now subscribed to those.
OpenEVSE Support
said
almost 2 years ago
The issues can be tracked here. We are currently working on an overhaul of the Networking subcomponents to enable these improvements, in addition to many more.
https://github.com/OpenEVSE/ESP32_WiFi_V4.x/issues/30
Al Savage
Over in this ticket from 2017, Glyn asked to allow the UI httpd port be user-configurable to something other than the then-hardcoded 80.
Later in the comments, Chris said: "Once [WiFi] 3.x supports HTTPS changing the default secure port 443 to another port would not be a problem."
Jeremy later said, "The ESP32 build will have support for the server to run over HTTPS, that is what Chris means by it will be supported in the 3.x version"
I've just replaced my 2017-vintage ESP8266 WiFi module with a freshly-flashed Huzzah ESP32-WROOM-32, loaded with v4.1.2 . A bit off googling didn't point me to anybody stating how they've changed either the UI's port number, or to enable https (on any port).