Start a new topic

Wifi Adder Board

Can someone help me fully understand how to remove the R28 resistor when adding a wifi board?  Do you just desolder and remove that's it or do you need to short that connection with a wire?

If you short, then cant you just solder a wire from one point to the other and leave the resister in place?

Also, I presume you can leave the R28 resister in place if I add in an external power brick to power the wifi board.  

thank you.

1 Comment

Desolder and remove, do not short.

Yes, the resister can stay if you use external power.


Login or Signup to post a comment