Unable to send AC voltage change via RAPI - RAPI_RESPONSE_BLOCKED
D
David
started a topic
7 days ago
Hello Everyone!
I did a bunch of searching and I'm completely confused from the scant amount of information I've found. I also opened a ticket but I'm
cross-posting here in the forums in case someone here has a solution.
Some data about my setup:
I am in the US.
OpenEVSE version 8.2.3.CGMI
OpenEVSE WiFi version v5.1.4
In the monitoring tab it says I am at 240v. I am trying to change
the voltage in my EVSE from 240 to 230 because my inverter hovers around
230 +/-2 volts. I want to get more accurate numbers for charging.
However when I try to send RAPI command "sv 230000" I get the message
RAPI_RESPONSE_BLOCKED. How do I send this command so my reference
voltage for monitoring is 230 not 240 volts?
Thank you in advance for any help anyone can provide.
David
Hello Everyone!
I did a bunch of searching and I'm completely confused from the scant amount of information I've found. I also opened a ticket but I'm cross-posting here in the forums in case someone here has a solution.
Some data about my setup:
I am in the US.
OpenEVSE version 8.2.3.CGMI
OpenEVSE WiFi version v5.1.4
In the monitoring tab it says I am at 240v. I am trying to change the voltage in my EVSE from 240 to 230 because my inverter hovers around 230 +/-2 volts. I want to get more accurate numbers for charging. However when I try to send RAPI command "sv 230000" I get the message RAPI_RESPONSE_BLOCKED. How do I send this command so my reference voltage for monitoring is 230 not 240 volts?
Thank you in advance for any help anyone can provide.