Support

Hello,

I want to compil the ESP8266_WiFi_v2.x-master on a ESP8266. I need to compil it to add a statut led WS2812B during charging / plug / error etc...

When I try to compil it, there is lot off error ; i'm lost.

I need :

- #include "openevse.h" 

- #include "espal.h" 

- #include "RapiSender.h"

- #include <ConfigOpt.h>

- #include <ConfigJson.h>

and maybe others... it stop to try compil ^^

How to find all this libraries ? When I install Openvese board in toolbox, I have a issue : 

loading hardware from C:\Users\Lemoult\AppData\Local\Arduino15\packages: loading package OpenEVSE: loading platform release C:\Users\Lemoult\AppData\Local\Arduino15\packages\OpenEVSE\hardware\avr\1.0.0: Error reading file: Error parsing data at line 0: Invalid line format, should be 'key=value'

Erreur de compilation pour la carte LOLIN(WEMOS) D1 R2 & mini

I suppose there is something wrong... I already find "arduinoJson" / "ESPAsync", but others I d'ont find them... :(

I just received OpenEVSE 5.5 board ; which version it is ? Will it be compatible with ESP8266_WiFi_v2.x-master ? Do I need to upgrade it to 7.1.3 ?

Best regards

I don't know platform IO... I will try, I will come back to you.

Hello, ok I buy a ESP32 : 

https://www.amazon.fr/gp/product/B074RGW2VQ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1

I succed to compil the project with plaformIO, but it seem the ESP WIFI is not detected at starting the OpenEVSE ; I don't see the Wifi Version. I just connect power / Tx / Rx, and I cross Rx / Tx of OpenEVSE and ESP32 Wifi of course.

The ESP32 restart continusly (I see this with serial terminal) because it don't find the OpenEVSE board

I don't buy an huzzah esp32, but I think it will be possible to upload the projet on any ESP32 no ? I just need Tx / Rx, it's the same for every ESP32 ? 

Best regards

Hello,

I try to compil with platformIO, it's works yes, but the ESP32 (https://www.amazon.fr/gp/product/B074RGW2VQ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1) don't find the OpenEVSE board, (don't see any board in the web interface) and the OpenEVSE board don't see the wifi board (no Wifi version at start up)

I just have to connect power supply and Tx / Rx (by crossing them of course) but it doesn't works.

I haven't do any modification in the source code right know, I just want to try both board.

It's not the an huzzah esp32, but a serial port on the esp32 is always the same ; do you think it can be this ? The az-delivery board is very populare purchaser.

Best regards