I have a homemade electric car with a J1772 inlet enabled by an AVC2 board from modularEVpower.. It activates EVSEs but does not account for the varying amp ratings sent by the pilot signal. I am wondering if there is some piece of hardware that can display the duty cycle on a gauge or digital monitor, and ideally control some relays too.
Luke Brechtelsbauer
I have a homemade electric car with a J1772 inlet enabled by an AVC2 board from modularEVpower.. It activates EVSEs but does not account for the varying amp ratings sent by the pilot signal. I am wondering if there is some piece of hardware that can display the duty cycle on a gauge or digital monitor, and ideally control some relays too.