Current Measurement

Display always reads 0A even though vehicle is Charging okay
To Display real-time current, an optional (Included in Deluxe kits) Current Measurement transformer part number CR8450-1K-T7QC must be installed. Unlike the...
Mon, 19 Oct, 2015 at 12:59 PM
Measured current is lower/higher than anouther reading
The current measurement in OpenEVSE can be calibrated to more closely match another accurate or trusted source. OpenEVSE RAPI commands are used to get a...
Thu, 24 Jun, 2021 at 10:05 AM
Voltage displays 240. How do I set to something different?
OpenEVSE hardware does not currently measure voltage. The voltage used in energy calculations is assumed to be 120v for L1 and 240 for L2. This value can be...
Thu, 24 Jun, 2021 at 10:22 AM