How can we help you today?

Start a new topic
Discussions OpenEVSE Forums Report a problem

Think I got moisture in my OpenEVSE

When I cracked open the box, I saw that the input terminals on the contactor were very corroded, and a strong smell of burnt insulation.

While there was no visible moisture in the box, my guess is condensation, but given my experience with mains electronics, I figured I'd ask if there was anything else I might want to check?

Thanks!

    Rob D

3 CommentsSorted by Newest First

No problem, that looks like heat. I would recommend replacing the contractor and stripping back the wire a little until it is clean and shiny. I would also recommend installing the latest firmware 3.11.3 that includes temperature monitoring and throttling if you have the Color display.



here it is, sorry I took so long- thanks!
jpeg
image.jpeg
(1.83 MB)

Hi Rob,


Sounds more like overheating. A less than perfect connection between the input or J1772 wires and the contactor can cause excessive heating of the wires.


Can you post a picture?

Login or Signup to post a comment
More topics in Report a problem
See all 95 topics